新增網頁1

Wireless Sync Flash Trigger – It is a very useful and helpful photography partner which helps you to get a different and special image result for creating your own style. It is good for every photography scene and especially for portrait or merchandise photography.

Light effect is an important photography element. If you don’t want to take all pictures same as by front flash lighting directly. And you want to take a picture by varies lighting direction to get your own style image. This Wireless Sync Flash Trigger is your good choice.

The Great Features of this Wireless Sync Flash Trigger which is running DUAL wireless mode. Radio mode - triggering the remote flash unit by transmitter. Optical mode - triggering the slave flash unit by the master flash unit.

More, this Wireless Sync Flash Trigger able to control multiple receivers for triggering remote flash unit at the same time even using radio mode or optical mode. And, a PC sync socket which available at the receiver for connecting with some flashes which without hot shoe such as studio flash etc......

(Extra receivers can be purchased from our eBay store individually)

　

　

This combo included

1 x transmitter and 2 x receivers Features: Ultra long working distance : This wireless sync flash trigger can be operated up to 30m / 100 feet at radio mode (open area). And, optical mode up to 10m / 30 feet. Dual wireless mode :

Radio mode: Triggering the remote flash unit by transmitter.

Optical mode: Triggering the slave flash unit by the master flash unit. LED indicator : LED available at both of transmitter and receiver, the red light will be single flashed during every trigger of the transmitter and receiver. 4 channels connection (radio) : 4 channels connect combination available for switching to a good connection to prevent jamming. Easy and convenient : Easy to get flash synchronization without limit caused by cords. Support multiple receivers : The transmitter will able to control multiple receivers for triggering flash unit at the same time. And, multiple receivers can be used under optical mode also. (Extra receivers can be purchased from our eBay store individually) 1/4" Tripod socket : A 1/4" tripod socket available at the bottom of each receiver for fixing onto tripod. PC sync socket : A PC sync socket (2.5mm jack) which available at the receiver for connecting with some flashes which without hot shoe such as Studio Flash etc...... Do you need slave flash unit?

We also have slave flash unit available in our eBay store for your needs.

This combo included 1 x transmitter and 2 x receivers

Multiple receivers can be triggered at the same time

Adjusting all channel panels on the receivers and the transmitter to a

same combination. The transmitter will able to control multiple receivers

for triggering flash unit under radio mode at the same time.

And, multiple receivers can be used under optical mode also which can

be triggered by the master flash unit at the same time.

(Extra receiver can be purchased from our eBay store individually)

Dual connection receiver

Radio wireless mode: Switching to " W " ; Triggering by transmitter.

Optical wireless mode: Switching to " L " ; Triggering by master flash unit.

Optical sensor

This optical sensor will be operated under optical wireless mode is selected.

It will be triggered by another flash unit such as the built-in flash** of your

camera or the external master flash unit***.

** Built-in flash --- Because of the red-eye reduction flash mode and the TTL flash

will make the built-in flash going pre-flashing. Thus, it is needed to turn off the

red-eye reduction flash mode before using optical wireless mode.

And, it is needed to switch to manual mode if the built-in flash is operating

with TTL. (not every camera have option to switch the built-in flash to

manual mode, please see the camera's manual)

*** External master flash --- If your master flash unit is a TTL flash, it is needed to

set the flash to manual mode before using optical wireless mode.

Or, using a standard flash unit will be fine.

PC sync socket & PC sync cord

A PC sync socket (2.5mm jack) which available at the receiver for connecting

with some flashes which without hot shoe such as Studio Flash etc......

And, a 2.5mm jack to 6.35mm jack PC sync cord is FREE included.

New power saving circuit design

Transmitter: 1 x 12V/23A battery (FREE installed)

Stand by time: 1 yrs approx *

Receiver: 1 x CR2 battery (FREE included)

Life time: 10,000 times approx *

*Base on Alkaline battery calculated.

Metal 1/4" tripod socket

This metal tripod socket let the receiver can be fixed on the tripod for

convenient to locate your flash unit.

Hot shoe socket

Specifications: Model: CTR-301P (2 x receivers) Radio wireless: Channel quantity: 4 channels Wireless frequency: 433MHz Working distance: Radio wireless:

Up to 30m / 100 feet

(open area) Optical wireless:

Up to 10m / 30 feet

(open area) Standby Output: Transmitter: 3uA Receiver: 0.9MA Compatible with: Camera:

Canon / Nikon / Olympus

Pentax / Samsung / Fujifilm

Flash Unit:

Support manual mode and auto (not TTL) mode.

Canon: 430EX II / 430EX / 580EX II / 580EX

550EX / 540EZ / 420EX / 430EZ

520EZ / 420EZ / 380EX

Nikon: SB600 / SB800 / SB900

SB28 / SB27 / SB26 / SB80DX

SB25 / SB24

Pentax: 540FGZ / 360FGZ / 200FG

500FTZ / 280T

Olympus: FL-50 / FL-40 / FL-36

FL-50R / FL-36R / FL-20

Vivitar Flash

Sunpak Flash

Respond time: Up to 1/250s PC sync socket: 1 at the receiver (2.5mm jack) PC sync cord:

Each receiver come with 1 x PC sync cord

(Plug - 2.5mm jack / 6.35mm jack) LED indicator: Single flashing (red) during every trigger / test Power supply:

Transmitter: 1 x 12V/23A battery

(Stand by time: 1 yrs approx.)

Receiver: 1 x CR2 battery

(Life time: 10,000 times approx.) Package Contents:

1 x Transmitter

2 x Receivers

1 x English Manual

2 x PC sync cords (FREE included)

1 x 12V/23A battery (FREE installed)

2 x CR2 batteries (FREE included)

Shipping Policy

• Purchased item(s) will be shipped within 1-2 working days by airmail from Hong Kong after payment settled.
• We offered standard flat rate for the shipping charge to worldwide.
• The delivery time will be 4 to 14 working days approximately and it will be depended on different destination.
• Purchased item(s) will be shipped with bubble padded protection.

Sales Policy

• All products are 100% brand new and QC passed.
• In case of the merchandise to be defective or malfunction during delivery, buyer need to prove it within 30 days from the date of purchase.
• We are not responsible for any merchandise that is abused, intentionally or artificially damaged.

Payment Method

• PayPal only.
• We accept USD, AUD, GBP and CAD payment.
• Thank you for your purchase.

Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.