Canon EOS 50D Online Store

YN-560 Flash Speedlite for Canon1D 5D 5D II 5D III 50D For Sale

This item has been shown times.

YN-560 Flash Speedlite for Canon1D 5D 5D II 5D III 50D:
$99

This new designed flash YN-560 is compatible with any camera with the standard hot shoe, the function is similar to the YN-460II, but we designed some new special part and upgraded the function, what's more, it used the Unsalted gate bipolar transistor circuit design, it's more beautiful, creditable and professional.

Function

New Power zoom function
You can push the button on the flash and make it covered focal length range from 24mm to 105mm.

Guide number: 58 at ISO100, 105MM

Slave function ( S1, S2 mode)

You just can use YN-460 and YN-460 II in indoor and at a very weak light, but for YN-560, you can use it in outdoor environment, and the wireless triggering distance is as around 15m

Sound Indicator
When the charging process is finished, the flash will give a tich sound, so you may concentrate on the creation process. ( The sound can be closed )

New Charging socket for external power pack
You can charge this YN-560 to meet the higher demand for charging recycle, you can use SF-18 for Canon version and SF-17 for Canon version to charge it.

New PC synchronous port
It's the 3.5mm standard PC port, you can use YN-560 with the flash trigger via the cable with 3.5mm port. For RF-602, you can use the RF-602 021 / 3.5mm cable, and so on.

Super speed of charging recycle
It only takes 3 seconds in charging after full power output. Even without new batteries, you can get the super charging speed that it only needs 4-5 seconds, you can completely get rid of the nightmare of anxious waiting for charging. In addition, you can use the external power pack to accelerate the charging speed once more.

　
Supporting high speed continuous shooting
Under the output level of 1/8 or below, YN-560 can support the 8FPS high speed continuous shooting

The Improved power saving mode
In the power saving mode, the flash keep sidle for 3 minutes and then it will step into the dormancy state in order to save power. and it will automatically shutdown after keeping idle for 15 minutes. If you disabled the power saving mode, the power saving indicator will be on, the flash won't step into the dormancy state after being stopped. It will be automatically shut down after 30 minutes

The more fine output control
The adjustment range of YN-560 output level is 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, there are 8 levels of put and each level has 8 ine tuning stalls

The automatic setting saving It can automatically save your current setting.

Overheating protection
If it is used too frequently, its overheating protection function will be triggered, the red and green lights of the charging indicator will blink alternatively, and it will be locked. in such case, please wait for about 3 minutes to cancel the protection before continuing the using.

m), Manually set the zooming position:

　

The covered focal length of the flash will switch in circle of 14 / 28 / 35 / 50 / 70 / 80 / 105mm by pressing the button.

Advanced Application

Multi-Lamp Lighting Application
Exposure Bracketing ( FEB)
Use Wide-angle Diffuser
Rear-curtain Sync
FE Lock ( This function can only be available when your camera supports it, for the setting of FE lick, refer to your camera manual)
Application of AF LED
Exposure Compensation
Reflection Flash
Use Reflection Board to take photo